General-tools-and-instruments CL10 Manuale Utente Pagina 3
- Pagina / 20
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
INTRODUCTION
On jobs ranging from installing a through-the-wall air-conditioner to renovating a house with new
wiring and plumbing, it is vital to know the locations of existing electrical cables and wires, as
well as those of metal and non-metal pipes carrying water and gas. Without access to the
building’s construction drawings, there is no way to be sure that an action as simple as driving a
nail into a wall will not produce an electric shock—or far worse.
The CL10 Cable & Pipe Locator was designed to address this serious safety issue with maximum
flexibility. The CL10 consists of two main units—a transmitter and a receiver—and a set of
accessories. The two main units work together in the following way in most applications. The
user attaches the transmitter to an existing cable or wire (or metal pipe). In response to the push
of front-panel buttons, the transmitter sends a radio-frequency current and a digital identifying
code down the cable or wire. The current generates an electric field that can be sensed by the
receiver if its nose (probe) is positioned nearby—even on the other side of a wall, floor or ceiling.
Circuits in the receiver convert the weak induced voltage into a signal strong enough to be
displayed graphically and digitally. Other circuits read the identifying code to confirm the source
of the signal. By manipulating the strength of the transmitted signal and the sensitivity of the
receiver, the user can precisely locate cables, wires or pipes behind walls or under floors, as well
as discontinuities within them.
The system is equipped with several functions and features that improve its utility, accuracy and
reliability. One is the inclusion of big, bright LCDs, visual and audible indications, and mutable
loudspeakers—as well as an LED flashlight—on both units. Another is the system’s full
compatibility with single-pole and two-pole circuits. Other examples include the ability of either
unit to measure AC/DC voltage, just like a voltmeter. The transmitter even automatically tests its
own functioning and displays the results.
KEY FEATURES AND BENEFITS
• Makes it safe to break through a wall by revealing and locating hidden cables, electrical lines,
and water/gas supply pipelines up to 6.6 ft. (2m) behind it
• Eliminates the need to find and read construction drawings before starting a job
• Detects breaks and short circuits in buried cables, electrical lines and floor-heating systems
• Identifies the circuit breaker or fuse associated with any energized or de-energized 110V outlet
• Traces branch-circuit sockets that have been accidently plastered over
• Transmitter and receiver communicate using any of eight codes; each displays readings on a
big, bright, multi-function graphic LCD. Both units also include a flashlight (for illuminating dark
areas) and a mutable beeper/buzzer.
• The transmitter displays its transmission power level (any of three levels), transmission code,
battery status, any voltages it detects, and the results of its functional self-test
• The transmitter or receiver also can operate as AC/DC voltmeter with a range of 12 to 600V
3
- CABLE & PIPE LOCATOR 1
- TABLE OF CONTENTS 2
- INTRODUCTION 3
- KEY FEATURES AND BENEFITS 3
- SAFETY INSTRUCTIONS 4
- WHAT’S IN THE BOX 4
- PRODUCT OVERVIEW 5
- SETUP INSTRUCTIONS 7
- OPERATING INSTRUCTIONS 8
- SPECIFICATIONS 15
- WARRANTY INFORMATION 18
- RETURN FOR REPAIR POLICY 18
- TOLL FREE (800) 697-8665 20
- 80 White Street 20
- New York, NY 10013-3567 20
- PHONE (212) 431-6100 20
- FAX (212) 431-6499 20
Prodotti e manuali riguardandi Attrezzi General-tools-and-instruments CL10
(8 pagine)
(12 pagine)Panasonic CQ-C5305U manuály
Uživatelské manuály a uživatelské příručky pro DVD přehrávače Panasonic CQ-C5305U.
Poskytujeme manuály pdf Panasonic CQ-C5305U ke stažení zdarma podle typů dokumentů:
Commenti su questo manuale